PRODUCT DESCRIPTION It is an acrylic resin-based, water-based decorative paint with a velvety and satin texture, giving the appearance of pearls. SPECIFICATIONS A putty surface is required for Nippon Paint Duchesse Satin Soft Touch Matt application. Old painted coverings, glass textiles, and wallpapered surfaces should be removed if possible, and puttyed with Nippon Paint interior wall putty. Application All surfaces to which Nippon Paint Duchesse Satin Soft Touch Matt will be applied must be smooth, hard, dry, clean, and in a condition that can hold paint. The surface should be puttyed with Nippon Paint Interior Wall Putty. After sanding the surface of the putty, Nippon Paint Interior Paste Primer should be applied to it and the surface preparation process completed. Duchesse Satin Soft Touch Matt is applied to the surface in the following way: Nippon Paint Duchesse Satin Soft Touch Matt Calcino is applied flat in two coats, allowing it to dry between coats with a trowel. For the application of the third layer, it is applied to the surface again with a Clacino trowel, more than the first layers, and the pattern is given with the rule of the same trowel with S or eight drawing movements without allowing the product to dry. The application should take place between +10°C and +35°C. Color variation may occur due to application methods in colors ordered other than the Duchesse Satin Soft Touch chart. In these cases, a sample run is recommended. Our products should be applied to infrastructure surfaces made in accordance with the General Technical Specifications for Construction dated 30.06.2007 and No. 26568. CONSUMPTION Depending on the absorption of the surface, an average area of 6.5-7.5 square meters can be coated in 3 coats with a capacity of 1 liter. A controlled sample should be made for the specified consumption. STORAGE It can be stored for 3 years in its unopened package, in a cool dry place, protected from frost and direct sunlight. Close the cap tightly immediately after use. PACKAGE 2.5L, 1.25L
